|
Wall Mounted Fiber Optic Splice Closure
Item No.:CWFOC1005
They are typically used for customer drops, tap-offs (taut sheath) and in-line splice applications, Also be suitable For FTTH Installations.
The wrap-around thermoplastic body consists of two hingeable shells that are sealed with an O-ring system and that can easily be closed using latches. One mass splicing tray and cable attachment units are provided at the inside.
Features
-
In-line thermplastic closure
-
Four cable ports, two on each side
-
Cable sealing based on gel technology (2 knobs for gel compression)
-
Easy re-entry and re-closure
-
Compatible with most cable constructions (loose tube, central core, slotted core
-
4 general cable ports, could be suitable for connect different branch cable, including uncut cable.
-
It is used high quality imported material to make sure the closure service life.
-
It is used raw adhesive tape for sealing.
-
It applies to direct buried, aerial, pipe-lined applications, and solves the storage problem
|
Dimension for the Closure（L×W×H）
|
280mm×200mm×90mm
|
|
Ports For Cable Entrance
|
2 Ports
|
|
Suitable Diameter For the Cable
|
Φ14 mm
|
|
Max capacity
|
Bundle Cable
|
12-96
|
|
Ribbon Cable
|
144
|
|
Quantity Of Splice Tray Installed
|
1-2
|
|
